+

Advertising Trailers & Van Conversions

Billboard Trailers Advertising Trailers and Ad Van

CLICK HERE FOR ADVERTISING TRAILER PRICE AND SPECS. LIST

FIRST THE PICTURES.

PLEASE SCROLL DOWN FOR INFORMATION.

PLEASE CLICK HERE TO SEE ADVERTISING VAN CONVERSIONS

One of three of our smaller advertising trailers, bought by MGMotor for the promotion drive to launch the MG6GT across the UK . Click on the pic to see all three.

How the Nottingham Evening Post makes good use of one Armitage's 20 feet by 10 feet 48-sheet billboard trailers

These five advertising bodies are each 16ft long and 8ft high. We were able to extend the Sprinter chassis overhang by around two ft to achieve this while still staying within the 60% chassis length  provisions of Construction and Use Regs. If you really need the full 20ft long ad body we can stretch the chassis wheelbase. This is much cheaper with front wheel drive chassis cabs than with rear wheel drive vehicles

 

If you can't see this one, glasses would be a wasted investment!

United we lay?

The Toblerone factory?

Supplied with PVC banners already fitted to Phenol sided 16ft trailer. See the price list to learn just how little it costs to put an image as effective as this before your customers. And don't forget, if you want to change your campaign weeks or months down the line,

the banner can be changed without needing the services of a highly-skilled bill sticker.

These 12-footers prove that trailers don't have to be enormous to be effective. The vinyl banners were fitted at our works before going to national vehicle auctioneers, Manheim.

 

 

Shop front style advertising trailer with  an 8ft x 6ft dsiplay area. Delivered, ready for action. Big enough to shout loud but small enough to be towed by virtually any four-wheeler on any licence.

Hinged hatch open with fixed lights

16 x 5 x 8 GRP Faced ply twin axle unbraked

 

Basic 12 x 5 x 8 Phenol timber single axle unbraked

Showing lift off hatch & removable lighting used for ballast when not towing. Click here to see the lighting arrangement

Showing hinged hatch & fixed lights

12 x 5 x 8 1600kg Braked GRP faced ply sides c/w floor to carry goods inside

 

Armitage's wide range of advertising trailers provides an efficient, cost-effective way of making sure your message reaches the public and gives your product the exposure it needs. The range starts with an 8 feet long by 6 feet high by 4 feet wide, single axle trailer, clad in either hard-wearing phenolised timber or in stay-white glass reinforced plastic/plywood composite and goes right up, in four-foot stages, to 20 feet long, twin axle vehicles.

When specified with a floor and hatch, our advertising trailer can readily be ballasted for stable towing or even carry cargo. In its basic form, with neither hatch nor floor, the advert trailer is just the thing for roadside, semi-permanent advertising. All our advertising trailers are based on galvanised steel chassis and A-frames. They can be specified with single or twin axles and with or without brakes (some of the bigger advertising trailers must have brakes because they weigh over 750kg).

Advertising trailers with phenolised timber finishes are ideal for carrying banners or paper posters. They are available right up to industry-standard, 48-sheet billboard trailer, 20 feet by 10 feet. Our GRP ad trailers are perfect for sign-writing, adhesive vynil lettering or images. The surface is gel-coated, making it just as weather-proof and colour stable as a boat! GRP trailers are available with a seamless signage area up to 20 feet by 8 feet.

PLEASE NOTE. OUR ADVERTISING TRAILERS ARE NOT GUARANTEED TO BE WATERPROOF, SO SOME CARE MAY BE NEEDED WHEN THINKING OF DUAL USE, SUCH AS TRANSPORTING A CARGO WHILE SPREADING THE WORD.


© Armitages Trailers 2008 - Billboard Trailers, Advertising Trailers and Ad Vans