This sleek design are made on site from mild steel and then is hot dipped galvanised to protect it from rust. These are very popular in
the Motorhome Industry/Motorbike enthusiasts and with a very competitive price tag of £1150.00 including VAT. You can see why our
customers love them due to the workmanship that goes into making these so light but yet so durable whilst allowing a load of 225kg of
Motorcycle which are built on 350kg gross.
These are manufactured with back supporting legs which allows these to be stored in a garage when limited for space and for an extra £120.00
you can have the caster system that makes wheeling these around effortless.
This is a premier built trailer and due to it having a transverse design, this keeps the trailer length as short as possible. This not only takes
up an amazingly small amount of space on the road and on camp sites, but can save an absolute fortune in ferry fares for bikers and motorhomers
who regularly cross the channel.
The single unit's on the road footprint is just 58 inches long and 83 inches to 92½ inches wide, depending on the length of the bike.
The deck is 20 inches from the ground. The re-designed trailer will happily carry a bike weighing up to a very generous 225kg, this
can be made to carry a heavier bikes on a 500kg gross trailer, however you need to be confident on loading that weight of bike up the ramps.
Our Side loading Motorcycle Trailer not only comes with a fantastic price tag of £1150.00 including VAT but come with ramps, handle
bar and seat post ratchet straps and a hitch lock.
*****These are normally in stock and please contact us to come and see these in our workshop.*****
Here we have a very popular Side Loading Motorcycle trailer capable of With our great design you can see it being stored nice and neat in
taking upto 240kg bike built on 350kg gross. a garage with our back legs, great if you are limited to space.
Our brilliant design allows you to remove the legs and replace with the Step 1) Here we have a Motorcycle being loaded with the folding ramps and the
our caster system and allows these to moved at ease. seat holder allows the Motorcycle to be held in place with no support.
Step 2) Here are two Motorcycles that have been loaded and can see the handlebar ratchet straps have been used to bring the Motorcycle into the front wheel
holder and pull down on the front suspension to secure the Motorcycle in place.
Step 3) Here are 2 images of the seat holder being pulled down over the deepest part of the seat allowing you to ratchet straps this down take some suspension off the back forks
by having some one pull down on the back of the Motorcycle, not too tight as need to allow for some play in the suspension for different terrains. We would recommend getting some
hard backed carpet or extra padding to protect the seat.
Here we have an image of customer ratchet strapped in 3 points, one on his handlbars, seat holder
and the rear of the Motorcycle back to bring suspension down to stop in bouncing again he left
enough play to allow for different terrains, again he has used foam/sponge to protect the seat.