The trailer to the left was built with a lower than usual front rail so that the rear stabilisers of the trike could hang over the front rail. This meant that the scooter could fit on our standard-sized mobility scooter trailer. There was no extra charge to make this alteration.
We are more than happy to talk through any special requirements you may have for a trailer to carry an out-of-the-ordinary scooter, be it longer, wider or heavier than the usual scooter (or all three!). This trailer is also fitted with the optional locking towing hitch for peace of mind. We can slso supply spare wheels, fitted to the trailer or loose to be carried in the car.
Here at Armitage's we have a range of solutions to the problem of making sure you can take your mobility scooter along with you when you need it most.
Many people are now choosing to carry their mobility scooters on platforms which we attach to the rear of motorhomes and to other suitable vehicles. Here, on the right, we have combined the folding platform with an adjustable framework to mount the Fiamma carry-box, to contain a hoist and other specilaised equipment.
There are two types of mobility platform, folding or fixed, each available in two mounting styles.
The folding platform costs £355 when fitted to a motorhome in conjunction with one of our towbars.
Usually, we supply this with a platform measuring 60 inches by 30 inches, though we can easily vary this size to suit your needs. It can carry 100kg of scooter.
If you already have a towbar (it must have a bolt-on towball, as in the picture below)
, then we can fit the adaptor plate version of our platform. This can carry 100kg of scooter and costs £405.
When the platform is not being used it can be folded up in a matter of seconds, just like this. If the platform is not the answer we can offer our brilliant little mobility scooter trailer, which is decribed and pictured further down this page.
All you have to do is pull out the spring pins you can see in the hinge units, fold the platform into
the upright position and pop the pins back in. As you can see in the left photo the lighting board folds
into the appropriate position as well.
Alternatively, we offer the "fixed" mobility platform, which costs £275 and, again, can carry 120kg
when fitted in conjunction with our own towbar. The adaptor plate style, which can carry 100kg is £325.
The "fixed" platform does not offer the folding facility when it is not in use but it can be removed very
easily. If it's the adaptor plate version you simply slacken off the bolts you can see next to the chain
in the right hand picture, a little further up the page. If the platform is mated with one of our towbars
there are just two bolts to slacked and the platform simply sides out of its mounting channels.
Should you wish to, you can remove the folding platform in exactly the same way.
We offer bi-folding loading ramps at £180 for three wheelers or a pair of telescopic ramps ar £120 for
four wheelers, should you need them.
It could be, of course, that your motorhome or car cannot carry the weight of the scooter and platform,
making our mobility scooter trailer the answer.
This model, with a floor measuring 60 inches by 30 inches is £679. It can be towed behind any vehicle
which is allowed, by UK law, to tow. It is specially designed with ultra-low loading height to make it
as easy as pie to direct your scooter up the fold down ramp into place.
We are happy to make the mobility scooter trailer in virtually any size you require. You can add on a few
inches in any direction for £50 or we can make you a double scooter trailer (side by side or tandem) for
ALL THE ABOVE PRICES PRESUME EXEMPTION FROM VAT ON THE GROUND OF DISABILITY OR ILL-HEALTH.
Please click here to see many more pictures